Peppol for Belgian contractors: what has been mandatory since 1 January 2026
Who must send invoices over Peppol, what to do with reverse charge, advance invoices, progress statements and credit notes, and what the fines are.
On this page
Since 1 January 2026, a contractor established in Belgium and registered for VAT has to send its invoices to Belgian business customers as a structured electronic invoice, which in practice means over the Peppol network. A PDF attached to an email is no longer the legal invoice for those customers, the tolerance period that softened the start ended on 31 March 2026, and the rule covers advance invoices and credit notes as well as ordinary invoices. Private customers stay outside the obligation. This article explains who is covered, what a Peppol invoice actually is, how the typical construction documents (reverse charge, advances, progress statements, credit notes) fit into it, how to check whether a customer can receive, and what the administration can fine.
Last checked on 8 November 2026. This is general information about the rules and no substitute for tax or legal advice, so for your own situation it is worth a short conversation with your accountant.
What the law has required since 1 January 2026
The obligation sits in article 53, §2bis of the VAT Code, inserted by the law of 6 February 2024 (adopted text, Chamber document 55 3743/004): a taxable person established in Belgium issues a structured electronic invoice to another taxable person who has to give its Belgian VAT number for that transaction. Three details matter more for builders than for most trades. The obligation also applies when VAT becomes chargeable on an advance payment, so an advance invoice (voorschotfactuur, facture d'acompte) is a Peppol invoice too. Any document that modifies the original invoice and refers to it clearly counts as a structured invoice and must be issued in the same format, which is how credit notes are caught. And the date that counts is the date of the invoice: the official FAQ (question 14) says that every invoice drawn up, issued or sent from 1 January 2026 is covered, whether the work was done before or after that date, so a December 2025 progress statement invoiced in January 2026 already had to go over Peppol.
The same FAQ (question 11) is blunt about the PDF: from 1 January 2026, the structured electronic invoice is the only legally required invoice. You may still send a PDF alongside it as a courtesy, but the customer cannot reject an invoice because the PDF is missing (question 12).
The tolerance announced on 18 December 2025, under which FPS Finance applied no penalties during the first three months of 2026 to firms that could show they had taken timely and reasonable steps, was not extended. FPS Finance later confirmed that the general tolerance had ended, adding that in exceptional cases it may still decide not to fine after looking at the individual file (its notice, as republished by Forum for the Future on 5 April 2026). The separate tolerance for invoices drawn up by the customer (self-billing) ended on 30 June 2026 (FAQ question 23).
Who has to send and receive Peppol invoices
The question to ask is about the customer: does this customer have to give you its Belgian VAT number for this transaction? If it does, the invoice goes over Peppol, and the table below follows the law and the official FAQ, question 2.
| Your situation or your customer's | Peppol invoice? | Where it comes from |
|---|---|---|
| Belgian firm in the normal VAT regime invoicing a Belgian firm registered for VAT | Yes, send and receive | art. 53, §2bis VAT Code |
| Small business under the franchise scheme (turnover up to €25,000) | Yes, the obligation applies | FAQ question 2 |
| Farmer under the special agricultural scheme | At least for receiving | FAQ question 2 |
| Flat rate regime of article 56, bankrupt firm for the bankrupt activity | Excluded from sending | art. 53, §2bis VAT Code |
| Supplies exempt under article 44 | Not for those supplies | art. 53, §2bis VAT Code |
| Firm registered for VAT in Belgium without any establishment here | Not covered, neither as supplier nor as customer | art. 53, §2bis VAT Code, FAQ question 2 |
| Private customer | No, a normal paper or PDF invoice | outside art. 53, §2bis |
| Public customer | Already through Mercurius, which uses Peppol | FPS BOSA, Mercurius |
Many blogs from 2025 say that small businesses under the franchise scheme are exempt, but the official FAQ says the opposite, and FPS Finance repeated it in its notice on the end of the tolerance, so a plasterer in Mechelen who works for himself and who invoices less than €25,000 a year still needs to be able to send and receive. The line about firms without a Belgian establishment matters for Romanian readers: a Romanian SRL that works on Belgian sites with only a Belgian VAT number and no establishment here is outside the obligation, while a Belgian BV or SRL owned by Romanians is inside it like any other Belgian company. The supplier side was settled by the law of 2024, which only covers taxable persons established in Belgium, and the customer side by article 4 of the law of 10 February 2026 (Belgian Official Gazette of 20 February 2026), which took customers identified for VAT here without an establishment out of the scope. Whether a long site with your own crew and equipment amounts to an establishment for VAT is a question to put to your accountant.
A renovation firm in Liège may well have three kinds of customers in one week: the invoice to a general contractor goes over Peppol, the invoice to Mrs Lambert for the bathroom of her 1980s house is a PDF or paper invoice that carries the 6% statement explained in our guide to VAT on building work, and the invoice to the municipality goes through Mercurius. A firm that only works for private households does not need anything to send over Peppol, but it still has to be able to receive the Peppol invoices of its Belgian suppliers, since a customer without the means to receive is the one who risks the fine.
What a Peppol invoice actually is
A Peppol invoice is a file, not a picture of an invoice. It is an XML document in the UBL format that follows a specification called Peppol BIS Billing 3.0, which is the European standard EN 16931 applied to the Peppol network. Every amount, date, VAT rate and VAT number sits in its own named field, so the customer's accounting software can read it without anyone typing it in again.
The network has four corners. Your invoicing software hands the file to your Peppol service provider (an access point), which finds where your customer receives documents and delivers the file to the customer's provider, which passes it to the customer's software. To find the customer, the access point reads a central DNS record (the SML) that points to the address book of the customer's provider (the SMP), where the document types the customer accepts are listed. Belgian companies are registered under their enterprise number with the scheme code 0208, so you never need to ask a customer for a “Peppol ID”, and you can only register through a service provider, usually the one behind your invoicing software (Peppol FAQ, questions 4 and 5).
For builders, the most practical rule is about attachments. A progress statement, a measurement sheet or a signed work order that belongs to an invoice is legally part of that invoice, so it travels inside the same Peppol message and not in a separate email (FAQ B2B, questions 19 to 22). The allowed formats are pdf, png, jpg, csv, xlsx and ods.
Construction invoices on Peppol, case by case
Reverse charge between contractors
When you invoice another contractor who files periodic VAT returns, you charge no VAT and the customer pays it under the reverse charge (verlegging van heffing, autoliquidation). On a Peppol invoice the lines carry the VAT category AE, and the reverse charge clause that Belgian law requires goes into the general note of the invoice (field BT-22) and the exemption reason at line level (field BT-120), as the official FAQ explains in question 11. Question 27 matters on both sides: a customer may not reject an invoice that says “reverse charge” just because the longer mandatory text of article 20, §3 of Royal Decree no. 1 is missing. If that text is missing, it is the supplier who is exposed, because the clause that shifts the liability to the customer does not take effect. The exact wording is in the VAT article.
Advance invoices
An advance invoice is a full Peppol invoice because the law names advance payments explicitly (art. 53, §2bis, 2°). In the UBL file it has its own document type code, 386, instead of the 380 of a normal invoice. The final invoice then states the whole price and deducts what was already invoiced in a field for prepaid amounts, so the customer's software can match the two.
Progress statements
The progress statement (vorderingsstaat, état d'avancement) travels as an attachment inside the Peppol message, and when the work covers a month the period can be given at line level with a start and an end date (specific FAQ, question 17). One invoice may also carry several VAT rates (question 7), so a 21% line and a 6% line can sit together when that is legally correct.
Credit notes
A credit note that corrects a Peppol invoice must also be a Peppol document (question 23), with its own type code 381 and a reference to the invoice it corrects. A PDF credit note is only still possible when the original invoice was itself not structured and the customer accepts it.
A worked example
Take a tiling firm in Antwerp with four employees, working as a subcontractor for a general contractor on a block of flats. The contract is €48,000 excluding VAT, with an advance of 30% on signature. The method is simple: the advance is 30% of the contract, and the final invoice deducts it.
| Document | Date | Type code | Amount | VAT on the invoice | To pay |
|---|---|---|---|---|---|
| Advance invoice | 15 March 2026 | 386 | €14,400 (30% of €48,000) | €0, category AE, reverse charge note | €14,400 |
| Final invoice | 30 June 2026 | 380 | €48,000, prepaid €14,400 | €0, category AE, reverse charge note | €33,600 |
Both documents go over Peppol with the reverse charge text in BT-22, and the progress statement signed by the site manager travels as a PDF inside the June invoice. If a surveyor later finds 12 m² counted twice at €50 per m², the tiler issues a Peppol credit note of €600 referring to the June invoice, still without VAT because the reverse charge applies to the correction as well.
How to check whether a customer is on Peppol
The official Lookup Peppol tool described in the Peppol FAQ (question 6) searches by name or by enterprise number, written as “0208:” followed by the ten digits without “BE”, and shows whether a company can receive invoices, though the FAQ warns that it does not tell you whether the company can send them.
The public Peppol Directory is easy to search but only lists companies whose service provider chose to publish a business card for them, so a company missing from it may still be reachable. What an access point actually relies on when it delivers an invoice is the SML record and the SMP address book, which means a tool that queries those two gives you the real answer and a tool that only searches the directory gives you a hint.
When your customer or your supplier is not ready
If your customer cannot receive over Peppol, you may send the invoice another way, which is then legally valid, and it is the customer who risks the fine for not having the means to receive; once the customer is connected, you do not resend old invoices (FAQ B2B, question 8). Since 20 February 2026 this is also written into article 53, §2bis itself: the law of 10 February 2026 says you are not required to issue a structured invoice when the recipient cannot receive it for technical reasons, but you still have to issue an ordinary invoice. If you send that invoice electronically, by email for example, the FAQ adds that the customer has to agree to it. If it is your supplier who still sends PDFs, you keep your right to deduct the VAT on that invoice and the supplier is the one exposed (question 7).
General contractors sometimes get one point wrong: a customer cannot oblige you to upload your invoices through its own portal without your explicit written consent (question 18). Peppol is the default channel, and a portal on top of it only applies when you have agreed to it in writing.
The fines, as the administration states them
The specific FAQ, question 26, lists the sanctions. A missing structured invoice, or one with missing or wrong mandatory information, falls under the proportional fines of table C of Royal Decree no. 41 of 30 January 1987. An invoice issued too late, or one that ignores the technical rules, falls under the fixed fines of Royal Decree no. 44 of 9 July 2012. The Royal Decree of 8 July 2025 (article 5, published on 14 July 2025) added a specific fine for not having the technical means to send and receive structured invoices: €1,500 for a first offence, €3,000 for a second and €5,000 for each further one, where a repeat only counts if it is found at least three months after the previous one.
On the customer's side, deducting the VAT on a covered purchase normally requires the structured invoice, although the FAQ (question 24) says the deduction is not refused when the material conditions are met; the fine for not being able to receive remains possible.
What it costs, and the 120% deduction
The government offers no free tool of its own. The official site explains that it deliberately chose a decentralised, market driven approach rather than a central government application (article of 23 May 2025), and it adds that applications already on the market offer more than a central government tool would, some of them even for free.
Sole traders and small companies can deduct 120% of certain costs instead of 100% (article 64ter, first paragraph, 1° of the Income Tax Code 1992, as restored by the law of 6 February 2024, which applies it to taxable periods starting between 1 January 2024 and 31 December 2027). The official page on the tax incentives says it covers periodic subscriptions to invoicing software and advice costs incurred specifically to prepare for or implement the obligation, never depreciation, and that an electronic invoicing surcharge on an existing subscription only qualifies when it is stated separately on the provider's invoice. The administration's circular 2026/C/46 of 19 March 2026, which I read through a professional summary, adds that advice on choosing a package does not qualify and gives this example: €500 of advice on which software to choose (not eligible) plus €1,000 of help to implement it (eligible) means that only the €1,000 is raised to 120%, so it is deducted as €1,200, while the €500 gets no increase.
What comes next
The next announced step is electronic reporting of invoice data to the tax administration. The official FAQ on electronic reporting says it is in the federal coalition agreement with 2028 as the timing, has yet to be written into Belgian law, can be automated from the structured invoice and would replace the annual customer listing. On 18 July 2026 the Council of Ministers approved a preliminary draft law for reporting certain invoice data in near real time, by the supplier and by the customer alike (official communiqué), and sent it to the Data Protection Authority and the Council of State for advice. The communiqué names no start date; EY reports that the draft plans 1 January 2028. On 8 November 2026 I found no bill filed in the Chamber, so treat 2028 as a plan rather than a rule.
What to do next
Most of this can be checked in an afternoon, and none of it requires buying anything.
- Look up your own enterprise number with “0208:” in the official lookup, and then your five largest business customers, so you know who can receive today.
- Ask whoever makes your invoices to send you the UBL file of one reverse charge invoice and one advance invoice, and check that the reverse charge text is in the note and that the progress statement is attached inside the file.
- Ask your accountant two questions: whether your current invoicing costs qualify for the 120% deduction, and whether any of your customers fall under a regime that changes the answer (franchise scheme, a foreign firm, a public body).
- Tell your largest subcontractors that their PDFs are no longer invoices, preferably before the next progress statement.
If you want to check a single company quickly, the free lookup at beloplan.be/peppol-check asks the SML and the SMP directly instead of the directory. Beloplan itself prepares invoices, advance invoices and credit notes in the Peppol format.*
* Sending and receiving over Peppol go live with our own Peppol access point, which is currently being certified.
The checklist for the other digital obligation that arrives in 2027 is in checking in and out on building sites from 1 April 2027, and if you still invoice from a spreadsheet, whether Excel is still enough looks at that decision honestly.
Sources
All checked on 8 November 2026.
- FPS BOSA and FPS Finance, official electronic invoicing FAQ: general questions B2B, specific questions, questions about Peppol, questions about e-reporting.
- Law of 6 February 2024 on the electronic invoicing obligation: Justel and Chamber document 55 3743/004.
- Law of 10 February 2026 containing various VAT provisions, Belgian Official Gazette of 20 February 2026, article 4.
- Royal Decree of 8 July 2025 on structured electronic invoices, Belgian Official Gazette of 14 July 2025, article 5.
- FPS BOSA and FPS Finance, tolerance during the first three months of 2026, 18 December 2025; end of the general tolerance, notice of FPS Finance as republished by Forum for the Future on 5 April 2026.
- FPS BOSA, where to start, no government solution, 23 May 2025, and Mercurius.
- FPS BOSA and FPS Finance, tax incentives for introducing electronic invoicing (in Dutch, also in French).
- Federal government, communiqué on electronic reporting of invoice data, 18 July 2026 (in Dutch).
- Secondary, labelled in the text: Forum for the Future on circular 2026/C/46; EY Global Tax News, 31 July 2026.
Did this help?