From Excel to software

Is a site app hard to learn? What the crew really does on the phone

The taps a worker makes on a Belgian site from the first evening to Friday, what the app records about him, and what happens in a basement with no signal.

On this page

For most crews a well made site app is not hard to learn, because a worker needs only a few actions on a normal day: starting and ending the day, taking the photo that shows the work is done, and now and then scanning material or a receipt. The hard part is rarely the screens but the question every worker asks first, whether the boss can follow him around, and after that the language and the basement without signal. It also helps to know that the new rule for checking in and out on construction sites from 1 April 2027 does not oblige an employer to hand out smartphones (explanatory memorandum to the programme law, Chamber document 56 1378/001, page 93).

Below I walk through a worker’s first day tap by tap, then deal with language, privacy and the missing signal, for the owner or office person who will have to convince the crew.

What a worker actually has to learn

What a worker on site learns is a handful of gestures, and the fewer there are, the faster the crew adopts them: one tap in the morning, two in the evening and a photo when a task is finished. Correcting hours or asking for leave happens once a week or less, and nobody needs to master it on the first day.

That matters because digital skills on a Belgian site vary more than most office people think. Statbel found that 59% of Belgians aged 16 to 74 had at least basic digital skills in 2023, and its 2021 data showed 26% among people with a low level of education against 77% among graduates, as Forum for the Future summarised them. The index combines five areas, so a worker who scores low on it may still use WhatsApp every day, but it does tell you that an app for the crew must not depend on typing, menus or settings, since those are the skills that are missing.

The first day, tap by tap

The walkthrough below follows the Beloplan phone app, which my company makes, because it is the only app whose taps I can count honestly; its check in and check out for Checkinatwork has been live since 5 November 2026, ahead of the legal obligation on 1 April 2027. Ask any vendor to show you the same day on their own app, and count along.

Take a renovation firm of nine people working on a block of flats in Berchem, in Antwerp, with a crew of three: Ionuț, the site lead, and two workers, all with their phones set to Romanian. The weekly planning puts the crew on that one site.

The evening before

Each of them receives an invitation by e-mail, taps the link and chooses a password. From then on, signing in asks for the e-mail address and the password and nothing else, because the company is found from the e-mail address, so there is no company code to remember. The app opens in Romanian because the phone is in Romanian, and falls back to English when the phone’s language is not one of the four it speaks. After the first sign in it offers to unlock with a fingerprint or the face the next time.

On site in the morning

At seven, Ionuț taps Începe ziua (start the day) once, and the timer starts on the site from the planning; when the planning does not name one site, the same tap opens a list of sites to choose from. Under the button there is a route button that opens the map to the address of the site.

On a site where Checkinatwork applies, which means a site whose declaration of works reaches EUR 500,000 or more excluding VAT, the app shows a separate button, Intră pe șantier (RSZ), and starting the timer never registers anyone at the RSZ by itself. The first time, the phone asks whether the app may read the position while it is in use, and both answers work. The app then shows Alt șantier? (another site?) with a button to cancel for five seconds, in case he pressed on the wrong site, and sends the registration, showing it as saved on the phone, sent and confirmed.

During the day

The task “Faianță baie etaj 2” (tiles in the bathroom on the second floor) is finished with a photo and a tap. The bags of tile adhesive in the van carry a QR label, and scanning it moves them from the van to the site, so the office knows where they went. At the hardware store a worker photographs the receipt and picks the site, which is all the app requires, and a cracked pipe is reported as a problem with two photos. At lunch he taps Pauză and confirms once, which stops the timer without asking anything else, and Reiau starts it again.

In the evening

At half past four, each worker taps Termină ziua (end the day), and the app shows the hours worked today with a question about the lunch break (30 minutes or none, and leaving it unanswered changes nothing), after which a second tap on Termină ziua stops the timer. On a Checkinatwork site the same screen holds a separate button, Înregistrează plecarea (RSZ), to register the departure, and the app says plainly that stopping the timer does not register it; a worker who stops anyway while still registered on the site is asked straight away whether he wants to check out now. On Friday, Ionuț opens his inbox and approves the week of his crew.

Counted from the screens, a minimum day without Checkinatwork is three taps, one in the morning and two in the evening, and with Checkinatwork it is five. I will not give you a number of minutes for the first day, because we have never measured it, and a figure without a measurement is exactly what I would not trust from somebody else.

The language question on a Belgian site

On many Belgian sites the crew speaks several languages, and that is the normal case. The HIVA study at KU Leuven, Posted workers from and to Belgium (November 2024, on Limosa data analysed by Constructiv), counted 61,404 posted employees and 27,889 posted self employed workers in Belgian construction in 2023, and the five largest groups of posted employees, from the Netherlands, Portugal, Ukraine, Poland and Romania, were each about a tenth of the total, without counting the many Romanians, Poles and Portuguese who live in Belgium and work for a Belgian firm.

Take a general contractor in Brussels with a Dutch speaking foreman, two Portuguese posted workers and a Polish subcontractor. The app in this walkthrough speaks Dutch, French, English and Romanian, so the Portuguese workers would use it in French or English, and it is better to tell them so before the first morning. The public authorities have the same gap, since the official information on Checkinatwork exists in Dutch, French, German and English only, and the High Council for Prevention and Protection at Work warned in its advice 281 of 2 June 2026 that foreign workers will find it hard to register where no registration device is available on site. My advice for a mixed crew is to choose the two or three actions they need and show them on site, in person, on the first day, phone in hand, because a gesture someone has seen once needs no translation.

What the app records about the worker, and what it should not

When a worker asks whether the boss is following him, the honest answer has two parts: what the app does, and what the firm still has to tell him in writing. In its guidance on geolocation at work, the Belgian Data Protection Authority accepts location data for purposes such as safety or checking work, but considers permanent monitoring disproportionate in principle and requires workers to be told beforehand what is recorded, why and for how long. Its decision 61/2025 of 25 March 2025, about a tracker in a technician’s car, found continuous recording disproportionate even though the employer only looked at office hours, and criticised a policy that gave no retention period.

The app in this walkthrough reads the position only at the moment of the Checkinatwork press, while the app is open, and the worker may refuse. Nothing runs in the background, there is no tracking during the day and no automatic registration when someone walks onto the site. Photos are resized and leave the phone without their GPS data, keeping only the time they were taken, and a worker never sees a price, a cost or a margin, which is built into the app so that no forgotten setting can change it. What the app cannot do for you is the written information the authority asks for, so put on one page what is recorded, why and for how long, and hand it to every worker before the first day.

No signal in the basement

Hours need a signal, and an honest app says so instead of pretending. Take a renovation of a cellar in Liège where the phone shows no bars at all. The timer cannot start there, because the app shows “No signal” and saves nothing behind the worker’s back, and stopping it needs a signal too, so the practical habit is to start and end the day at the top of the stairs. A site report written underground is kept on the phone with its photos and sent later by the person who wrote it.

The Checkinatwork press is the one action that waits for the signal by itself: it is kept on the phone with the time of the press and sent as soon as the signal returns. The RSZ does not accept a registration that arrives more than ten minutes after it was made, so after a longer wait the app shows the press as not registered because it came too late, asks the worker to register again and tell his foreman, and keeps the original press as proof that he did press. That is a reason to check where on your sites the signal drops before April 2027, not after.

Why crews refuse apps, and how to avoid it

Crews mostly refuse an app because it looks like more work or like a way to watch them, rarely because the screens are too difficult. A systematic review of 35 studies by Nnaji and colleagues in ITcon (2023) found that workers in construction adopt technology when they find it easy and useful and when the people around them use it, and in a survey that the vendor B2W commissioned from Dodge Data & Analytics (Construction Dive, May 2018), 61% of 153 North American civil engineering contractors named acceptance by field workers among their three main obstacles.

What works in practice is to answer the tracking question before anyone asks it, with the page described above, to start with one crew and one team leader who likes his phone, to let him show the others, and to keep the paper sheets for that crew for one more week before you stop them for good. The plan for switching from Excel in 30 days puts that pilot crew in week three, and the article on what software saves a construction firm of ten people shows how much of the saving disappears when the crew does not follow.

What changes in 2027

Two separate changes arrive in 2027, and only the first one is law. The programme law of 30 May 2026 turns Checkinatwork into Check in and out at work, which the RSZ applies from 1 April 2027 on sites where the main contracts on the same declaration of works add up to EUR 500,000 or more excluding VAT: every person registers himself, immediately and on site, on arrival and again on departure, and the employer may no longer register the crew in advance. The law is neutral about technology, so a badge or a QR code on site is allowed, and until 31 March 2027 the current Checkinatwork, with one registration a day, still applies. The article on checking in and out on Belgian sites from 1 April 2027 goes through every detail.

The second change is a general obligation to register working time, which the federal government plans from 1 January 2027 and which was not yet law on 8 November 2026; according to Securex (28 September 2026), employers would have until 31 March 2027 to put a suitable system in place, and the details could still change.

What a site app does not solve

An app does not give a smartphone to the worker who has none, and from April 2027 that person needs another way to register that the employer provides, such as a badge, a QR code on site or a company phone. The app in this walkthrough also does not let a site lead register a colleague, on purpose, because the law asks each person to register himself, and no app replaces the conversation with the crew, which decides whether the rest works.

What to do next

This week, walk your current sites with a phone and note where the signal disappears, because that tells you where the crew will start and end the day. Write the one page on what is recorded about the workers and why, and have your social secretariat read it. List which of your sites will still be running after 1 April 2027 with a declaration of works of EUR 500,000 or more, which workers on them have no smartphone, and whether the national register number of every worker is on file, since a registration cannot be sent without it.

Then choose the crew that goes first and the team leader who will show the others, and give them a date. If you are still deciding whether you need software at all, start with Excel or construction software.

Sources

  • Chamber of Representatives, draft programme law of 23 February 2026, explanatory memorandum, document 56 1378/001, page 93, dekamer.be
  • High Council for Prevention and Protection at Work, advice 281 of 2 June 2026 on the draft royal decree on registration when leaving the site, werk.belgie.be
  • Statbel, digital skills of Belgians, statbel.fgov.be, and Forum for the Future on the 2021 Statbel data, blog.forumforthefuture.be
  • De Smedt, L. and De Wispelaere, F., Posted workers from and to Belgium, facts and figures, HIVA KU Leuven, November 2024, PDF
  • FPS Employment, specific formalities in case of construction works, employment.belgium.be
  • Data Protection Authority, geolocation at work, gegevensbeschermingsautoriteit.be, and decision on the merits 61/2025 of 25 March 2025, PDF
  • Nnaji, C., Okpala, I., Awolusi, I. and Gambatese, J., A systematic review of technology acceptance models and theories in construction research, ITcon 28 (2023), itcon.org
  • Construction Dive, Dodge survey for B2W Software, 23 May 2018, constructiondive.com
  • Securex, Tijdsregistratie vanaf 2027, waar staan we vandaag, 28 September 2026, securex.be

All sources checked on 8 November 2026.

About the author

Denys-Daniel Croitor

founder

Denys-Daniel Croitor is a founder of Beloplan. He writes about how construction firms run their sites and offices, and about the step from spreadsheets to software.